|
Pinpointing with the ACE 250 Pinpointing is one of the most important, but simple to learn, techniques you need when treasure hunting. Knowing how to pinpoint correctly can mean the difference between digging a six-inch hole or a 2-inch plug. |
|
||
 Targets typically pinpoint under center of coil. |
|||
Using the Pinpoint Mode (ACE 250) The ACE 250 is equipped with an electronic Pinpoint pushbutton that makes pinpointing more accurate. Using this Pinpoint Mode is simple to do. After detecting a target, place the searchcoil on the ground to the side of the target’s suspected location. Now, press and hold the Pinpoint pushbutton while maintaining contact with the ground and slowly move your searchcoil from left to right and then front to back over the suspected target’s location. The maximum sound will be heard when the target is directly beneath the center of the searchcoil as shown. Also, while electronically pinpointing, the Upper Scale on the LCD indicates signal strength. When the greatest number of LCD segments (increasing left to right on the scale) is shown, the center of the searchcoil is directly over the target. NOTE: Keeping the searchcoil on the ground will help ensure the distance between the coil and the ground remains constant throughout the pinpointing process; in this case the distance is zero inches. If the terrain does not allow for this type of “coil scrubbing” then do your best to maintain a constant height between the coil and the ground. To Learn more about Pinpointing Shallow or Irregular Targets (ACE 250) |
|||
