Garrett Metal Detectors   Language: 
  Made In The USA
Safety. Security. Peace of Mind
MT 5000 Metal Detector Photo Gallery MT 5500 Metal Detector Key Features MT 5500 Metal Detector Tech Specs MT 5500 Metal Detector Dimensions MT 5500 Metal Detector Accessories Garrett MT 5500 Walk-Through Metal Detector Specifications MT 5500 Walk-Through Metal Detectors MT 5500 Metal Detector Video

Technical Specifications

Operating: -4° F (-20° C) to +122° F (50° C)
Humidity to 95% non condensing
Storage: -40° F (-40° C) to 158° F (70° C)

Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 24 watts; no rewiring, switching or adjustments required.

Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 529.

Interference Suppression
100% sensor coil Faraday shielding; RFI interference reduced with hardware; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical interference minimized by coil design and circuitry.

Traffic Counter
Built-in and resettable with current reading available on LCD panel.

Multiple channels permit several MT 5500s and other Garrett detectors to operate simultaneously in close proximity.

Ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected; location of alarm lights on left and right side of display combined with variable tone indicates which side of the person the target is located.

Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. An audible alarm reports unauthorized attempts at access.

Infrared Sensor
Improves analysis of detection signal; increases throughput; helps eliminate "false alarms" and also provides accurate traffic counter.

Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control devices.

Programs designed to eliminate the problem of dissimilar targets canceling each other.

Attractive scratch and mar-resistant laminate with resilient end caps; control panel and cross members made of heavy duty aluminum.

Limited 24 months, parts and labor.

Contact Careers Legal ISO 9001 Certified SAFETY Act Approved About Garrett Dealer’s Login Made in the USA