| |
|
 |
NEW PD 6500i Walk-Through Caster Set
Part No. 1169101* (Gray color).....MSRP: $299.95
Part No. 1169100* (Beige color).....MSRP: $299.95
Includes two (2) rigid casters and two (2) swivel locking casters.
- Ideal for schools, special events, and stadium use.
Allows full mobility of PD-6500i walk-throughs by one person. No Lifting required. Move the detectors to a secure location when not in use and provide an unimpeded exit at the close of an event.
- Extreme stability combined with portability.
Two fixed casters with locking devices provides stable detector operation, while two swivel casters provide maneuverability. The assembly can be permanently attached to walkthrough’s base.
- All terrain environment design.
3-inch wheels allow movement over any hard surfaces. Durable, powder coated steel allows use in all types of environmental conditions. For wind speeds up to 20 mph (32 kph).
Available with swivels on either 2 or 4 wheels.
Shipping weight 21 lbs (9.5 kg) Shipping size 40 1/4" x 8 5/8" x 5"
* Designed only for use with Garrett PD-6500i walk-through unit. Walkthrough with casters will roll through doors more than 89" in height without having to tilt the unit. |
|
| |
|
 |
Desktop Remote Control with Zone Indication
Part No. 2266400
MSRP: $499.95
For remote operation of the detector from up to 50 feet (standard).
Contact Garrett for optional lengths
For use with Garrett PD 6500i (Beige color scheme only)
|
|
|
 |
Desktop Remote Control
Part No. 2225600
MSRP: $399.95
For remote operation of the detector from up to 50 feet (standard).
Contact Garrett for optional lengths
For use with Garrett MT 5500, MS 3500 or CS 5000 (Beige color scheme only)
|
|
| |
 |
|
Battery Modules
These optional battery modules are field-installable assemblies that provide approximately ten hours of uninterrupted operation. While recharging, a monitoring circuit allows the batteries to charge in less than 6 to 12 hours and then switches to trickle charge to ensure maximum charge without battery damage. The charge status is indicated on the LCD of the Garrett walk-through detector's control panel and an alarm warns the operator when batteries are low. |
| |
PD 6500i Battery Module, gel cell
Part No. 2225410.....MSRP: $199.95
- Recommended for use as an emergency battery backup source, where life cycle is limited (200 to 400 cycles).
- Typical ten (10) hours battery operation per
full charge.
- For use with the Garrett PD-6500i walk-through metal detector.
PD 6500i Battery Module, lithium ion
Part No. 2225420.....MSRP $499.95
-
Recommended for portable applications where battery is the primary power source.
- Can be charged and discharged many times over life span of battery (up to 2,000 cycles).
- Includes red status light, indicating whether battery is in the process of charging or is
fully charged.
- Includes Quick Change pack, with a bracket
and cables, for fast battery replacement.
Requires a 3/8" wrench.
- Typical ten (10) hours battery operation per
full charge.
- For use with the Garrett PD-6500i walk-through metal detector.*
* Note: When equipping older walk-through detector units with this battery module, please check with the Garrett factory to acquire
the proper software revision that may be required to provide accurate charge indication.
|
| |
PD 6500i™ Extended Battery Module
Part No. 2234700.....MSRP: $1,295.95
Up to thirty (30) hours operation.
30" width only. Available for gray color scheme detector only. Charger included.
|
| |
MT 5500™: Up to twenty (20) hours operaton.
Part No. 2225770.....MSRP: $199.95 |
| |
CS 5000™ and MS 3500™: Up to twenty (20) hours backup.
Part No. 2225700.....MSRP: $199.95 |
|
|
Remote Control
Part No. 1169400
MSRP: $59.95
Remote Control Kit
Part No. 2234900
MSRP: $129.95
Incudes remote control and receiver module
For use with Garrett PD 6500i |
 |
|
|
Control Monitor Analyzer (CMA™)
Part No. 1168310.....MSRP: $299.95
The CMA Interface Module is used with a 10/100baseT network and a personal computer. It allows control, real time monitoring and diagnostics from a remote location. The internal memory records all changes to settings and passenger traffic and alarm history for analytical evaluation.
For use with Garrett PD 6500i, MT 5500 or CS 5000 models
- Gain real-time access to all walk-through detectors on your network.
- Utilize group management function to control settings and analyze data on multiple walk-through detectors at one time.
With Garrett PD 6500i only
- Analyze security checkpoint alarm rates, patron counts and other diagnostic statistics.
With Garrett PD 6500i only
- Check settings and diagnose issues with detectors on your network.
 View CMA Interface Module™ PDF
|
| |
|
|
|
 |
Operational Test Piece (OTP)
Part No. 1600600.....$59.95
Designed to FAA 3-gun test requirements.
Can be used with all Garrett model detectors. |
|
|
| |
 |
Flat Test Piece (FTP)
Part No. 1620570.....MSRP: $24.95
Designed to represent a small knife or box cutter.
For test use with the Garrett PD 6500i |
|
 |
5 ft. Charging Cord
Part No. 9436900.....MSRP: $23.99
Allows charging multiple walkthroughs from a single power source. |
| |
 |
Removable Magna Dolly
Part No. 1168000
MSRP: $299.95
Removable wheel assembly for easy portability. 30" width only.
For use with the PD 6500i, CS 5000 or MT 5500 |
|
 |
10 ft. Jumper Cord
Part No. 9431900.....MSRP: $35.00
Allows multiple walk-through units to be linked to the same power source when operated in close proximity. |
| |
 |
Floor Anchor Kit
Part No.1604000
MSRP: $99.95
Provides excellent stability for the MS 3500 under all operating conditions. |
|
 |
Stabilizer Base
Part No. 1603900 (Beige color scheme)
2 included.....MSRP: $99.95
For use with PD 6500i, CS 5000 or MT 5500
Part No. 1603901 (Gray color scheme)
2 included.....MSRP: $99.95
For use with Garrett PD 6500i |
| |
 |
Transportation Brace
Part No. 1169200
MSRP: $59.95
(for 30" standard width detector)
Part No. 1169228
MSRP: $59.95
(for 28" width detector)
Part No. 1169232
MSRP: $59.95
(for 32" width detector)
Provides a collapsible solution that supports the walk-through metal detector during transportation.
For use with the Garrett PD 6500i, MT 5500 or CS 5000 |
|
 |
Adhesive Floor Mount Kit
Part No. 1604100 (Beige color scheme)
4 included .....MSRP: $99.95
Part No. 1604101 (Gray color scheme)
4 included .....MSRP: $99.95
For use with Garrett PD 6500i
|
| |
Permanent Magna Dolly
Part No. 1169000.....MSRP: $249.95
(for 30" width walkthrough detectors)
Part No. 1169032
(for 32.5" width walkthrough detectors)
Part No. 1169028
(for 28" width walkthrough detectors)
Permanently fastens wheel assembly for easy portability.
For use with the Garrett PD 6500i, MT 5500 or CS 5000
Requires installation. Permanent Magna Dolly is best installed at Garrett factory at time of purchase. |
|
 |
Environmental Cover, Soft
Part No. 1627030.....MSRP: $599.95
(for 30" width detector)
Part No. 1627032.....MSRP: $599.95
(for 32" width detector)
High quality UV-resistant, anti-mildew nylon cover. Protects walkthrough electronics from heavy rain and dust. Clearview window panels over touchpads, optics, and zone indicators.
For use with the Garrett PD 6500i |
| |
 |
Cable Feedthrough Kit
Part No.1605300
MSRP: $34.95
Allows waterproof connection of power cord through the top of a PD 6500i.
For use with the Garrett PD 6500i. |
| |
 |
6" Pocket Item Container
Part No. 1601200.....MSRP: $4.95
For placement of pocket items prior to screening |
|
|
 |
Cover Support
Part No. 9884900
MSRP:
$89.95
Use with or without Garrett Environmental Cover (Part No. 1627030). Provides extra rain protection when secured to the top of a PD 6500i walkthrough detector or when zipped into the Environmental Cover.
For use with the Garrett PD 6500i. |
|
